The 90° clamp block has two holes which are 90° to each other and hold round bars for mounting auxiliary equipment.
Model 1784-1 holds a ½” and ¾” diameter bar.
Model 1784-2 holds two ¾” diameter bars.
Accessory Bars
Are used with the Model 1784 Clamp Blocks for mounting additional equipment. They are provided in 8″ stainless steel lengths.
Model 1788-1 is ½” diameter.
Model 1788-2 is ¾” diameter.
Model 1784 90° Clamp Block
Model 1787 Curved Vertebrae Clamp
Model 1787 Curved Vertebrae Clamps (pair) are infinitely adjustable clamps. Where maximum rigidity is needed, two or more sets attach to the A/P bars on each side of the instrument.
Model 1787 Curved Vertebrae Clamp
Model 1793 Spinal Clamp
Model 1793 Spinal Clamp is a rotating, screw driven vertebrae clamp. Used for mounting on the A/P bars in any position with a wide adjustment range and maximum rigidity. Model 1793 allows precise lateral placement and even pressure distribution.
Model 1793 Spinal Clamp
Model 1790 Mounting Bars and Clamp
Model 1790 Mounting Bar and Clamp is used to mount stereotaxic manipulators. They consist of a square bar mounted to a ¾” diameter bar which is clamped to the A/P bar with Model 1784-2 Clamp Block.
Model 1790-2 fits the 1460 & 1760-SB series manipulators
(18.70 mm A/P Bar).
Model 1790-3 fits the 1760 & 1460-LB series manipulators
(21.65 mm A/P Bar).
Model 1790 Mounting Bars and Clamp
Model 1792 Calibrated Bar and Brackets
Model 1792 Calibrated Bar and Bracket mount to the A/P bars to accommodate stereotaxic manipulators.
Model 1792-2 fits the 1460 & 1760-SB series manipulators
(18.70 mm A/P Bar).
Model 1792-3 fits the 1760 & 1460-LB series manipulators
(21.65 mm A/P Bar).
