The most versatile model for chronic infusions.

A low profile and smaller diameter make this cannula line ideal for small animals.

Shorter profile for smaller animals such as mice.

Has an upward projection for direct connection of tubing to the guide.

Used for periodic, acute injections with a syringe.
The recessed top of this guide assists in guiding the syringe needles or Internal Cannula.

Designed to be used with an Alzet Osmotic Pump.

Used for self administration experiments.

Used for periodic, acute injections with a syringe. The recessed top of this guide assists in guiding the syringe needles or Internal Cannula.
Shorter profile for smaller animals such as mice.

Taller profile version of our guide cannula.

Used when combining injections with an osmotic pump.

Designed to eliminate the need for dental cement by placing the screws directly into the holes of the Flanged Cannula.

Nylon screw guides that allow for direct injection with a syringe.

Designed with a threaded cylindrical plastic pedestal molded around a piece of Teflon, fused silica or PEEK tubing that extends below the pedestal.

Designed with a lower profile, threaded cylindrical plastic pedestal that is molded around a piece of Teflon, fused silica or PEEK tubing.
Designed to be used with smaller animals such as mice.

For MRI compatible self-administration studies.

These are used with a combination vacuum and pressure pump to provide a continuous perfusion of fluid at a specific location.

Designed with a small plastic ring molded around the center of the pedestal to help prevent small animals from removing their dummy caps during the grooming process.

Stainless steel screw guides that allow for direct injection with a syringe.

Designed as a head mount with extracranial cannula tubing connected to it.