The iWorx 400 Series recorders are economical, high performance four, eight or sixteen channel data recorders for use with a broad range of analog amplifiers. The recorders offer 16-bit resolution at a maximum data collection speed of 10 kHz, making them appropriate for most research applications.
The included LabScribe software allows “one-click” control of the entire acquisition process, plus a large library of standard analytical functions to process data. The 400 series recorders are powered via a USB interface to any Macintosh or PC, eliminating the need to install special interface cards. Users are typically recording and analyzing signals within minutes of installation.
Datasheets:
IX-404: 4 channel recorder.
IX-408: 8 channel recorder.
IX-416: 16 channel recorder.
iWorx Amplifiers compatible with the IX-400 series
IA-400D
4 channel signal conditioner
ETH-256
2 channel versatile signal conditioner
Sensors with a BNC output
PRH-200
Patellar Reflex Hammer with a BNC connector
PT-100
Pulse Plethysmograph (Piezo Crystal) with BNC connector
RM-200
Respiration Monitor (piezo crystal) with BNC Connector
RM-200A
Respiration Monitor (piezo crystal) with BNC Connector (Animal)
PO2-100B
Pulse Oximeter with BNC outputs – finger sensor included
