The H10-24A has the same high density walls as the H10-24, with an extra inner lining of three layer LAG decoupling foam. This foam gives the A-model superior sound attenuation for the most demanding stimulus presentation or vocal response recording acoustical studies. The 3-layer LAG coupling provides a foam layer between the outer wall and the center high-mass, flexible-sheet layer. The inner foam layer provides absorption qualities for sounds generated or reflected inside of the cubicle. The cubicles are of sufficient size to hold a cage or hub with a full complement of stimulus-response modules and feeders. They will hold the longest modules (feeders and retractable levers or a nest/retreat box) on both end walls or a running wheel on one end of a rat test cage. It will also hold an octagon hub with feeders and retractable levers. The cubicle has two environment connection boards, ECBs, on the back wall for connecting the S-R modules and the Linc control cables. There is an exhaust fan in the center of the rear wall. The fan is powered by 28 volts from the control interface.


Dimensions:
Inside Dimensions: 28.5 in. (72.39 cm) wide x 17 in. (43.18 cm) high x 16.2 in. (41.15 cm) deep
Outside Dimensions: 31 in. (78.74cm) wide x 21 in. (53.34 cm) high x 20 in. (50.8 cm) deep