The Harvard Peristaltic Pump P-70 offers unparalleled accuracy, reproducibility, and ease of use. P-70 drive provides flow rates from 0.001 to 70 ml/min

The Harvard Peristaltic Pump consists of a control unit, a motor drive, a tubing cassette and some sample tubing.

Other benefits include:

• The ability to separate the motor drive from the controller to facilitate use and save space in incubators and fume hoods
• A library of tubing sizes is stored in the pump's memory minimizing set up time
• Custom tubing can be used allowing complete flexibility
• A full range of interchangeable motor drives to allow for economical ease of use over a broad flow rate range.

A complete range of programmable functions allow the pump to be easily adapted to a wide range of dispensing applications. The pump has pre-programmed flow profiles for:

• Constant Flow
• Flow Ramps
• Pulsatile Flow
• Concentration Based Fluid Delivery

Full Description

The Harvard Peristaltic Pump P-70 offers unparalleled accuracy, reproducibility, and ease of use. P-70 drive provides flow rates from 0.001 to 70 ml/min

Other benefits include:

• The ability to separate the motor drive from the controller to facilitate use and save space in incubators and fume hoods
• A library of tubing sizes is stored in the pump's memory minimizing set up time
• Custom tubing can be used allowing complete flexibility
• A full range of interchangeable motor drives to allow for economical ease of use over a broad flow rate range.

The Harvard Peristaltic Pump consists of a control unit, a motor drive, a tubing cassette and some sample tubing. The pump can deliver solutions over a range of flow rates from 0.001 to 1,500 ml/min depending on the motor drive used. Choose from three interchangeable motor drives. The motor drive modules provide flow over the following ranges:

• P-70 drive provides flow rates from 0.001 to 70 ml/min
• P-230 drive provides flow rates from 0.001 to 230 ml/min
• P-1500 drive provides flow rates from 0.01 to 1,500 ml/min

A complete range of programmable functions allow the pump to be easily adapted to a wide range of dispensing applications. The pump has pre-programmed flow profiles for:

• Constant Flow
• Flow Ramps
• Pulsatile Flow
• Concentration Based Fluid Delivery

In addition to the flow profiles, the pump has advanced user options that permit the pump to be controlled by a PC from its USB inputs as well as a range of options such as:
• Remote initiated start/stop times
• Communication with external devices through 15-pin I/O
• Constant pressure through BNC

All settings can easily be saved as user generated methods in the pump's memory. The method can be easily recalled and run very quickly, saving researchers valuable time. Connectivity to a wide range of external input or output devices is easily accomplished. A constant pressure mode may be utilized in conjunction with a pressure transducer. The pump will automatically rotate at the proper RPM for the tube selection and flow rate chosen. To further increase the accuracy, Harvard Peristaltic Pumps offer a rapid calibration routine to further optimize flow accuracy by entering a measured volume of fluid collected.

Features:
• LCD color touch screen with intuitive icon interface for unparalleled ease-of-use
• Remote design ideal for work inside incubators and fume hoods
• Interchangeable pump heads
• A library of tubing sizes stored in the pump's memory minimizes setup time
• Custom tubing can be used allowing complete flexibility
• Single channel or combined channel mode for setting flow rate
• Pump mode - runs continuously at a set flow rate
• Timed dispense - dispenses for a fixed time at a set flow rate
• Volume dispense - dispenses a fixed volume
• Footswitch control
• Analog control
• Bidrectional delivery
• CE, ETL (UL, CSA), WEEE, EU RoHS and CB Scheme Approved
• 2 year warranty