Consists of two Single Guide cannulas. The two pedestals are secured at the end-user’s specified center-to-center distance (c/c distance) to a thin (0.5mm thick) plastic plate (G11). We can make these with any of our Single Cannulas for small animals at any c/c distance greater than 3.5. For center-to-center distances of 3.6mm to 4.2mm, only a wire with the end bent over the pedestal can be used as a dummy cannula. For center-to-center distances up to 6.1mm, you will have to use PE50 tubing with your Internal/injector cannulas. For c/c distances greater than 6.1mm, two single Connector Assemblies may be used simultaneously.
Example of wording when ordering: C317(2)-5.8 (meaning 2 of the single C317G's set on the G11 plate at a c/c distance of 5.8mm)
PART NUMBER | TUBING SIZE | TUBING LENGTH BELOW PLATE | C/C DIST (FROM 3.6MM - 10.0MM) | TUBING ID MM (IN) | TUBING OD MM (IN) | USES 2 INTERNALS | USES 2 DUMMYS |
C311G (2)-C/C/SPC | 20 | SPECIFY | SPECIFY | .58 (.0228) | .90 (.0355) | C311I | C311DC |
C312G (2)-C/C/SPC | 21 | SPECIFY | SPECIFY | .50 (.195) | .81 (.0319) | C312I | C312DC |
C313G (2)-C/C/SPC | 22 | SPECIFY | SPECIFY | .39 (.0155) | .71 (.0280) | C313I | C313DC |
C315G (2)-C/C/SPC | 26 | SPECIFY | SPECIFY | .24 (.0095) | .46 (.0180) | C315I | C315DC |
C316G (2)-C/C/SPC | 24 | SPECIFY | SPECIFY | .29 (.0114) | .56 (.0220) | C316I | C316DC |
C317G (2)-C/C/SPC | 23 | SPECIFY | SPECIFY | .64 (.0250) | .64 (.0250) | C317I | C317DC |